弹片热机械疲劳试验方法研究及设计

针对弹片的热机械疲劳（TMF）试验要求，采用机械设计技术、机电技术、冷却技术、计算机技术和数据采集技术，提出了压力载荷和热载荷的加载方法，建立了2种载荷5个试验件的并联试验控制系统，并设计了弹片热机械疲劳试验器。试验结果表明:该系统能够同时模拟服役环境下弹片的压力载荷和热载荷。利用该试验系统进行了弹片的热机械疲劳试验，试验结果再现了弹片在服役状态下的失效模式。试验系统具有良好的重复度、较高的加载频率和加载精度。压力载荷最大相对误差为2.4%，绝对误差小于0.5N。温度载荷最大相对误差为3.55%，最大绝对误差为3.89℃。      

基于任务的微机电惯性系统规模化测试技术研究

针对传统惯性测试技术测试周期长、测试效率低、测试成本高等问题，提出了基于任务的微机电惯性系统规模化测试解决方案。研究分析了微机电惯性系统测试技术的研究现状和发展趋势，建立了基于任务的微机电惯性系统测试体系，详细论证了微机电惯性系统批量、并行、自动化测试解决方案的可行性，为微机电惯性系统规模化测试实践奠定了基础。     

基于G-M制冷机的大尺寸冷屏设计方法

介绍了基于Gifford-Mcmahon (G-M)制冷机的大尺寸冷屏的设计方法。该低温冷屏配合真空环境模拟室共同使用，为遥感卫星的星载遥感器等部件的红外定标试验提供20K的低温冷背景。该冷屏采用5台G-M制冷机进行制冷，外形尺寸达到1m×1m，是目前国内同类型冷屏中尺寸最大的。详细介绍了冷屏在容器内的安装布置、冷缩时的补偿等结构设计方法、冷屏的表面温度分布以及降温时间等计算分析。成功解决了大尺寸冷屏在低温环境下的冷缩补偿难题，试验结果表明:冷屏主要测点温度为15K，温度均匀性误差为±1K，达到并超过设计要求。      

双模式离子液体推进剂的分解特性与热试车实验研究

硝酸羟胺(HAN)/1 乙基 3 甲基咪唑硫酸乙酯(［Emim］［EtSO4］)混合离子液体推进剂具有绿色无毒、高性能、易电离的特点，既可以应用于化学推进模式，又可以应用于电推进模式，是肼类推进剂的一种理想的替代品.利用热重分析 差示扫描量热法(TGA DSC)研究了HAN/［Emim］［EtSO4］离子液体推进剂的热分解和催化分解过程.研究了其在升温速率为5 K/min~15 K/min时，热分解和催化分解情况下的失重过程和放热过程.失重结果表明，该离子液体推进剂分解过程中，放热曲线表明，分解过程存在两个显著的放热过程使用催化剂可以显著地降低推进剂的分解温度和残余质量.最后，研制了推力为200 mN的模型发动机，热试车结果表明，HAN/［Emim］［EtSO4］离子液体推进剂可以在催化点火条件下实现稳定启动，在空间推进领域具有良好应用前景.     

Stability of relative equilibria of the full spacecraft dynamics around an asteroid with orbit–attitude coupling

The full dynamics of spacecraft around an asteroid, in which the spacecraft is considered as a rigid body and the gravitational orbit–attitude coupling is taken into account, is of great value and interest in the precise theories of the motion. The spectral stability of the classical relative equilibria of the full spacecraft dynamics around an asteroid is studied with the method of geometric mechanics. The stability conditions are given explicitly based on the characteristic equation of the linear system matrix. It is found that the linearized system decouples into two entirely independent subsystems, which correspond to the motions within and outside the equatorial plane of the asteroid respectively. The system parameters are divided into three groups that describe the traditional stationary orbit stability, the significance of the orbit–attitude coupling and the mass distribution of the spacecraft respectively. The spectral stability of the relative equilibria is investigated numerically with respect to the three groups of system parameters. The relations between the full spacecraft dynamics and the traditional spacecraft dynamics, as well as the effect of the orbit–attitude coupling, are assessed. We find that when the orbit–attitude coupling is strong, the mass distribution of the spacecraft dominates the stability of the relative equilibria; whereas when the orbit–attitude coupling is weak, both the mass distribution and the traditional stationary orbit stability have significant effects on the stability. We also give a criterion to determine whether the orbit–attitude coupling needs to be considered.     

可重复使用热防护材料应用与研究进展

可重复使用热防护系统是为高速重复使用飞行器而发展的关键性技术,涵盖了地球大气环境及非地球大气环境下的弹道式再入、高马赫数巡航等应用场景。根据现有高马赫数飞行器热防护现状,对高马赫数飞行器的主要热防护系统类型、特点和使用场景进行了简要介绍。在此基础上,结合国外里程碑式可重复使用飞行器（X-15、SR-71、航天飞机、X-33、X-37B、Spaceliner等）,梳理了可重复使用热防护材料的应用与研究进展,论述了代表性可重复使用热防护材料的发展、性能、研制进度、特点及应用前景。对国外在可重复使用热防护材料研制中的设计及发展思路,以及所存在的主要问题进行了总结归纳,为可重复使用热防护材料未来的发展提供了思路。     

1 500℃极端高温环境下高超声速飞行器轻质隔热材料热/振联合试验

远程高超声速飞行器处于极为恶劣的气动加热与振动耦合环境中,长时间的高温与振动载荷相互叠加会导致飞行器热防护材料出现裂纹、错位、剥离或脱落,甚至会引发致命的安全事故。因此热防护材料在极端高温环境下的地面热/振联合试验测试,对于高超声速飞行器的安全可靠性设计极为重要。建立高温与振动复合试验环境,设法解决轻质多孔隔热材料在强振动下,表面温度难于准确测量与控制的难题,制作水冷式隔热装置保护价格昂贵的振动激励设备等,实现了1 500℃高温环境下高超声速飞行器轻质隔热材料的热/振联合试验。得到非金属隔热材料陶瓷纤维板内部的断裂形貌及裂纹断面特征。根据试验前、后材料的表观及微观变化以及内部结合剂的变化等试验结果,对材料进行改进。经过试验测试后,达到了使用要求。本文建立的1 500℃极端高温环境下的热/振联合试验系统及试验结果为远程高超声速飞行器热防护材料的抗振动能力评估、隔热效果确定以及材料性能的改进提供了重要支撑。     

基于实战使用的涡轴发动机空中起动飞行试验

以涡轴发动机实战使用中空中紧急起动相关技术指标和特情处置措施验证为目的,设计了贴近实战使用特征的发动机空中起动试飞方案,并以某涡轴发动机设计定型试飞为依托,进行了不同飞行工况下的飞行试验验证和数据分析研究。结果表明:该空中起动试飞方案合理可行,能够最大程度的贴近部队实战使用的技术特征,满足对发动机起动高度包线、起动时间等研制总要求规定的技术指标验证需求;试飞结果表明该型涡轴发动机4000m以上高度停车至再起动期间直升机平均下滑高度约为670m,平均停车时间约为185s。该试飞方法和数据结果可为部队实战使用过程中空中遭遇停车的紧急处置提供支持和参考。     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

直升机起飞性能试飞方法研究

当直升机可用功率不足以维持地效外悬停时,直升机可以利用地面效应增速至一定前飞速度完成起飞。研究了地面效应和前飞速度对直升机剩余功率的影响,阐述了利用剩余功率进行有地效起飞的原理。介绍了3种有地效起飞方式,并使用水平加速—定速爬升法进行了起飞性能飞行试验,得到了水平越障距离随爬升速度的变化曲线,对飞行试验结果进行了分析,得到了有益的结论。